RussBussYOH

Many people are starting to hear about the new smoking device called a vaporizer. They are relatively new and i am pretty familiar with them. A vaporizer is a device that heats your weed until it naturally smokes, or vaporizes, creating a more pure smoke. But, i shouldn't say smoke because almost 95% of it inst smoke, its THC vapor. If you are to vape, and inhale this vapor, your high is much more greater and enjoyable. You can find grade-A quality vaporizers online, or you can do what i did, AND MAKE YOUR OWN !!


HOW TO: VAPORIZER!

things you will need: scissors, knife, screwdriver, hollowed pen, electrical tape, bottle of water, [salt.]

_______________________________________




step one: take your light bulb, and flip it upside down so the screw-grooves are facing you. there is a silver circle around the end of the screw groove. fasten the scissors around the circle and start pulling and twisting, it will come loose. ones that is off, put your knife in the hole and hollow out all of the excess paint. now you should have a perfect hole at the end of it. from here, take out the filament and other shit that lies inside th bulb so it is relatively empty. now, if your bulb is coated white so you cant see in, pour a little bit of salt in and empty a few caps of water in with it. swish that around and the white coat will come right off. pour that out, now you have an empty bulb. put the bulb aside.

step two: take your bottle of water and empty it. cut off the top piece, right above the top of the label. from there keep trimming it down until you have about an inch and a half of thin plastic from the cap to the end. now, start cutting frills into the plastic. leave that piece aside. take your cap and make a two holes in it, one big on for the empty pen, and the other for a rush. put the pen in the bigger hole. now, screw the cap on to the piece of bottle you made with frills.

step 3: put your weed into the bulb. take the bottle and put it at the screw-groove of the bulb and fasten the frills to hug the sides, and tape nicely so vapor does not escape.

step 4: while inhaling through the straw, light a lighter below the bulb where the weed lies until the bulb fills with vapor, rush it out. to put more weed in, simply unscrew the top cap of the bottle, refill, and burn on !!!



^^ sure hope i helped, questions or comments are cool too guys

TnStonerChick

ismokeontreees

we have these like laying around in my apt haha
they do get you high and you can put anything in them stems and seeds

ValleyJoe

Awsome share Russ!! THanks!

Hey! Have you checked out our STONER CAMS? CLICK HERE THEN!

Goldducky

i made one before!
mine tasted horribble!!!! i was high as fuck though!

TnStonerChick

GanjaGleam

omg amazing!!!!!!

BeccasMuffin

This looks fairly simple, I think I"ll have to try it out. Thanks!!

"Green stoner needs food!"

RussBussYOH

it works fantastic! if you use a blunt straw you can get flavor on your hit too!

RussBussYOH

you probably got melted plastic on your pen and inhaled the fumes. try a blunt straw to increase flavor.

shadywagon

I gotta try that

Think for yourself. Question authority.



Blaze On

- Shadith Wagonai

Goldducky

na dude i didnt melt the pen im sure of that
i think it might have been burning the bottom of the light bulb on accident im not sure?

RussBussYOH

could be, some light bulbs have a thin coat of plastic on the inside and out. always clean thoroughly.

Berserker16

Awsome tutorial! Gotta try this out.

Goldducky

i did that to! lol
i cleaned it like 5 times the way it says in the directions.
is it possible to still burn the bottom of the lightbulb even with no plastic?

wem511

exactly. tks bunches again russ

vape all day long.

RussBussYOH

welcome

wtf_

nice russ! i gotta try this out heard about it before but never got around to it, seems farily simple! btw the fire has to be under it but not touching the bulb itself though right?


have you though about figuring out a way to use a flouresent bulb?!?! lol O: